Note: First G chord is without the pedal!
Hey, I've had this good pedal for a week so I decided to make a video with it. I recorded 2 tiny demos and this is the first one. I've used a Vox AC30 clean profile, making the pedal work hard. For the lead guitar, I've put the drive at 9 o'clock, tone at 12 o'clock and set the switch to "High Peak" which gives more distortion, volume, and upper-mid clarity. Again, I did this to see how hard I could make the pedal work. I'll upload the second demo by the end of the week, again, using a rock n' roll theme but using the switch at "Low Peak" and other small differences. Gear used in this video: Fulltone OCD Timber Tones Blonde Horn Pick Spectraflex cables Kemper Profiling Amp Eric Johnson AS Fender Stratocaster -------------------------------------
0 Comments
Follow me on:
http://www.facebook.com/miguelbatalhabookface http://www.twitter.com/mbatalhamusic http://www.soundcloud.com/miguelbatalha The full pack can be found, here: http://xrayprofiles.bigcartel.com/product/blend-diezel-d-moll-fortin-marshall It includes 20 profiles, featuring 2 amps running at the same time: a Diezel D-Moll and a Fortin modded Marshall VM2466. For this demo I've used profiles number, 13, 2 and 3. For business enquiries: www.miguelbatalha.com/contact.html or PM through any social webplace. Gear used in this video: Timber Tones Blonde Horn Pick Spectraflex cables Kemper Profiling Amp Eric Johnson AS Fender Stratocaster For bass I used Octaver Effect from Kemper. |
Archives
May 2016
Categories
All
|